Bolzzen Electric Scooter Electric Bikes
< All Topics

Getting Started –

Now it’s time to get going with your Bolzzen Magneto and setup for your first exhilarating ride with one of Australia’s favourite Electric Scooters.

Folding and Unfolding

After you’ve unboxed all your goodies, now comes the time to unfold your Magneto and get it ready to rock! When it comes to folding and unfolding, it’s never been easier!

To unfold, place your Magneto on the ground, place some downward force on the deck and raise the stem upwards. Simply click the stem lock clip into place and check that it is locked in securely. 

To fold, hold the deck steady, unclick the stem lock clip, lower the stem and secure the hook to the stem hook lock.

Charging the Battery

Whilst we ship our Electric Scooters with some charge, it’s important to give your Magneto a full charge before setting out for the first time.

Remove the plastic and tie-wires from your charger and plug it into the wall, do not turn it on until after the next step. Then, carefully plug it into the deck mounted port. Ensure you’ve got a tight, clean connection. Turn power on at the power point now. 

Whilst the charger is connected, the status light will be Red whilst charging and Green when fully charged; a full charge should take anywhere from 9-12 hours.

NEVER leave your charging battery unattended. 

For best performance, make sure you’re charging outside of temperature extremes. Anywhere between 5°C and 40°C should be fine. Outside of these, internal protections in the battery will trigger and charging will stop.

Table of Contents